Critical Atom Power Supply

Features:

• Compatible with all coil and rotary machines.
• Built in magnets and grippy silicone for use on a variety of surfaces
• Simple push/Rotary control to turn on/off output and to change voltage (No pedal required to run)
• Color indicates voltage (range 1.5 – 17)
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Maintained or momentary foot pedal modes
• Jump start enabled for hard starting rotaries
• Fully machined, Anodized Aluminum housing – available in silver or black
• Dimensions: 1 3/4” height, 2 7/8” diameter, 6.4 oz weight
• Comprehensive 2 year manufacturers warranty
• Includes: Atom power supply, 1 US power cord and power adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

Critical Atom Power Supply

Features:

• Compatible with all coil and rotary machines.
• Built in magnets and grippy silicone for use on a variety of surfaces
• Simple push/Rotary control to turn on/off output and to change voltage (No pedal required to run)
• Color indicates voltage (range 1.5 – 17)
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Maintained or momentary foot pedal modes
• Jump start enabled for hard starting rotaries
• Fully machined, Anodized Aluminum housing – available in silver or black
• Dimensions: 1 3/4” height, 2 7/8” diameter, 6.4 oz weight
• Comprehensive 2 year manufacturers warranty
• Includes: Atom power supply, 1 US power cord and power adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

Critical Atom X Power Supply

Features:

• Compatible with Coil and Rotary machines
• Built in Neodymium magnets for a strong hold
• Jump start Enabled for hard starting machines
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-17vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• 2 Voltage presets
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full mfg warranty
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

• Compatible with Coil and Rotary machines
• Built in Neodymium magnets for a strong hold
• Jump start Enabled for hard starting machines
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-17vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• 2 Voltage presets
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full mfg warranty
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

The clamp mount is designed for convention travel, clamps to a standard convention table and puts your Power Supply anywhere you want it.

Critical Power Supply - CX1-G2

Features:

• Jump start Enabled for hard starting rotaries
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Voltage presets 2
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full mfg warranty
• Included: 1 G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

Critical Power Supply - CX2-G2

Features:

• Jump start Enabled for hard starting rotaries
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Session machine run time meter
• Total machine run time (odometer)
• Session time
• Session currency meter (based on hourly rate set by user)
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non-volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: 1 G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

Critical Power Supply - CX2R-G2

Features:

• Jump start Enabled for hard starting rotaries
• Independent Dual Outputs
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Session machine run time meter
• Total machine run time (odometer)
• Session time
• Session currency meter (based on hourly rate set by user)
• Pedal override button (No need for a foot pedal if you run continuous mode)
• Wireless foot switch ready
• You can now select the channel you want
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day
• Voltage presets with 2, 4, or 6 machine memory modes
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non-volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: G2 Magnet mount, 1 10/32 wing nut screw, 1 US power cord and adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

• Full color TFT display, selectable color theme, with large easy to read fonts
• Billet aluminum CNC machined housing
• Mount designed for more mounting flexibility.
• Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• Industry Standard 1/4” input jacks
• 4 amp peak current, 2 amp continuous
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new “Hybrid” billing mode automates user input)
• Pedal override button: No need for a foot pedal
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• Voltage presets with 2, 4, or 6 machine memory modes
• Universal input 90-240vac 50/60hz
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: XR power supply, Magnet mount, US power cord and switching power adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR

• Full color TFT display with user selectable color themes and large easy to read fonts.
• Billet aluminum CNC machined housing
• Carefully tuned Capacitive touch user interface
• New for the XR-D is a built in oscilloscope for a visual approach to coil machine tuning
• Mount designed for more mounting flexibility.
• Jump start feature and maintained pedal modes now independently assignable to preset/output buttons
• Industry standard 1/4” input jacks 
• Dual Outputs on the XR-D model
• 4 amp peak current, 2 amp continuous
• Session meter based on user set hourly rate: session mode, run time mode, or hybrid mode (new “Hybrid” billing mode automates user input)
• Pedal override button: No need for a foot pedal
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• Voltage presets with 2, 4, or 6 machine memory modes
• Universal input 90-240vac 50/60hz
• Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full manufacturer warranty
• Included: XR-D power supply, Magnet mount, US power cord and switching power adapter
• Made in the USA

WARRANTY INFO (CLICK HERE)

• WE DO NOT SERVICE CRITICAL POWER UNITS IN HOUSE, FOR WARRANTY AND REPAIRS, YOU MUST CONTACT THE VENDOR