• All components are sourced within the USA
• The electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords do
• Light weight with the same flexibility as the industry standard silicone wire
• High quality gold phono and RCA plugs
• 6'-0" long
• All cords are bench tested prior to packaging to ensure quality control

Lightweight RCA Power Cord - Black - Straight

• Length: 6ft (72 inches)
• Injection molded connectors for durability and strain relief
• Compatible with all power units equipped with a 1/4" input jack
• Lightweight power cord, helps reduce hand fatigue
• High quality plated connectors for improved connectivity

This lightweight ergonomically designed foot switch is the perfect size for travel. Includes a pre-wired 6'-0" long power cord with a 1/4" phono plug. 

Specifications:

• Steel housing with a powder coated finish to help prevent corrosion 
• Pre-wired with a 6'-0" power cord and a 1/4" phono plug
• Includes an anti-skid base pad for stability and safety
• Low profile ergonomic design, momentary action and needs little actuation force which helps reduce leg and back pain during those long tattoo sessions
• Assembled using an 18ga heavy duty power cord a 1/4" phono plug 

• All components are sourced within the USA
• The electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords 
• Light weight with the same flexibility as the industry standard silicone wire
• High quality phono plug
• Solid copper clips
• 6'-0" long
• All cords are bench tested prior to packaging to ensure quality control

• All components are sourced within the USA
• The round electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords do
• Light weight with the same flexibility as the industry standard silicone wire
• High quality gold phono and RCA plugs
• 6'-0" Long
• All cords are bench tested prior to packaging to ensure quality control

Black heavy duty silicone clip cord. Attach your tattoo machine to your power supply with this great looking, light and very flexible clip cord. Phono Jack included. 8 ft.

• All components are sourced within the USA
• The round electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords do
• Light weight with the same flexibility as the industry standard silicone wire
• High quality gold phono and RCA plugs
• 6'-0" Long
• All cords are bench tested prior to packaging to ensure quality control

Clip Cord Converter

This allows you to quickly convert your standard RCA power cord to a clip cord.

Lightweight RCA Power Cord - Black - Right Angle

• Length: 6ft (72 inches)
• Injection molded connectors for durability and strain relief
• Compatible with all power units equipped with a 1/4" input jack
• Lightweight power cord, helps reduce hand fatigue
• High quality plated connectors for improved connectivity

• All components are sourced within the USA
• The electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords do
• Light weight with the same flexibility as the industry standard silicone wire
• High quality gold phono and RCA plugs
• 6'-0" long
• All cords are bench tested prior to packaging to ensure quality control

RCA Clip Cord Adapter w/Cord

This adapter allows you to convert your standard RCA power cord to a clip cord. 

• All components are sourced within the USA
• The electrical cord is manufactured in the USA, 20 gauge, abrasive resistant outer jacket
• This cord will not stick to clip cord sleeves like the silicone type cords do
• Light weight with the same flexibility as the industry standard silicone wire
• High quality gold phono and RCA plugs
• 6'-0" long
• All cords are bench tested prior to packaging to ensure quality control

• All components are manufactured or sourced within the USA
• Aluminum body is manufactured in the USA
• Assembled using a high quality push button and phono type plug
• Aluminum body has an anodized finish for durability
• This will replace the need for a traditional style foot switch, these will fit power units that except 1/4" standard phono plugs

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord.   

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's

The Eos foot switch by Hyperion is the perfect choice for the studio or for the traveling artist.

Have you ever had your foot switch stop working while working on a client and realize you don't have a backup which can be embarrassing. Most foot switches are hard wired and once the power cord is damaged, it takes time to replace or you have to buy a brand new foot switch. While most foot switches are hard wired, the Hyperion foot switch has been designed with an RCA connection jack. This allows the artists to easily remove the RCA power cord for quick storage and proper cleaning. The RCA connection also allows the artist to quickly replace the RCA power cord should the cord get damaged or possibly develop an electric short. 

It features a durable power coated Pink finishing ring with a round black actuating disk and has a full, non-skid base pad. This pedal can be operated from any angle with moderate pressure with either your foot or your hand. 

Specifications:

• Pink Finish
• Non-skid base pad
• 7'-0" Strike RCA Power Cord (Included)
• Works from any direction
• Size: 1.25" Tall x 4" Diameter

Heavy duty foot switch in a tiny format and unbreakable design. Comes with a 290cm high quality cable and BNC ( locked on cable) connection to the switch and a classic jack 6.3mm plug to the power unit. All milled in air craft aluminum. Diameter of the foot switch is 7cm and a rubber pad grip on bottom for great fixture. BLACK-CLARET RED

The Eos foot switch by Hyperion is the perfect choice for the studio or for the traveling artist.

Have you ever had your foot switch stop working while working on a client and realize you don't have a backup which can be embarrassing. Most foot switches are hard wired and once the power cord is damaged, it takes time to replace or you have to buy a brand new foot switch. While most foot switches are hard wired, the Hyperion foot switch has been designed with an RCA connection jack. This allows the artists to easily remove the RCA power cord for quick storage and proper cleaning. The RCA connection also allows the artist to quickly replace the RCA power cord should the cord get damaged or possibly develop an electric short. 

It features a durable power coated Red Candied finishing ring with a round black actuating disk and has a full, non-skid base pad. This pedal can be operated from any angle with moderate pressure. 

Specifications:

• Red Candied Finish
• Non-skid base pad
• 7'-0" Strike RCA Power Cord (Included)
• Works from any direction
• Size: 1.25" Tall x 4" Diameter

Heavy duty foot switch in a tiny format and unbreakable design. Comes with a 290cm high quality cable and BNC ( locked on cable) connection to the switch and a classic jack 6.3mm plug to the power unit. All milled in air craft aluminum. Diameter of the foot switch is 7cm and a rubber pad grip on bottom for great fixture. BLACK-BLUE

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord.   

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord. 

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's

Heavy duty foot switch in a tiny format and unbreakable design. Comes with a 290cm high quality cable and BNC ( locked on cable) connection to the switch and a classic jack 6.3mm plug to the power unit. All milled in air craft aluminum. Diameter of the foot switch is 7cm and a rubber pad grip on bottom for great fixture. BLACK-GREEN

The Eos foot switch by Hyperion is the perfect choice for the studio or for the traveling artist.

Have you ever had your foot switch stop working while working on a client and realize you don't have a backup which can be embarrassing. Most foot switches are hard wired and once the power cord is damaged, it takes time to replace or you have to buy a brand new foot switch. While most foot switches are hard wired, the Eos foot switch has been designed with an RCA connection jack. This allows the artists to easily remove the RCA power cord for quick storage and proper cleaning. The RCA connection also allows the artist to quickly replace the RCA power cord should the cord get damaged or possibly develop an electric short. 

It features a durable power coated Green Candied finishing ring with a round black actuating disk and has a full, non-skid base pad. This pedal can be operated from any angle with moderate pressure. 

Specifications:

• Green Candied Finish
• Non-skid base pad
• 7'-0" Strike RCA Power Cord (Included)
• Works from any direction
• Size: 1.25" Tall x 4" Diameter

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord. 

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's

The Eos foot switch by Hyperion is the perfect choice for the studio or for the traveling artist.

Have you ever had your foot switch stop working while working on a client and realize you don't have a backup which can be embarrassing. Most foot switches are hard wired and once the power cord is damaged, it takes time to replace or you have to buy a brand new foot switch. While most foot switches are hard wired, the Eos foot switch has been designed with an RCA connection jack. This allows the artists to easily remove the RCA power cord for quick storage and proper cleaning. The RCA connection also allows the artist to quickly replace the RCA power cord should the cord get damaged or possibly develop an electric short. 

It features a durable power coated Blue Candied finishing ring with a round black actuating disk and has a full, non-skid base pad. This pedal can be operated from any angle with moderate pressure. 

Specifications:

• Blue Candied Finish
• Non-skid base pad
• 7'-0" Strike RCA Power Cord (Included)
• Works from any direction
• Size: 1.25" Tall x 4" Diameter

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord.

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's

Purchase a piece of history! This brass foot switch was designed after the same style used back in the 40's. Features a custom engraved traditional design with a distressed finish. Compact and lightweight, perfect for the traveling artist. Includes a 7'-0" power cord.

• All components are manufactured or sourced within the USA and assembled in house
• All brass switches feature a solid rubber anti-slip base pad
• These type plate switches will out last the electro-mechanical type as the only moving part is a top plate
• Comes with a 7ft clip cord style power cord with solid copper clips and high quality phono plug
• All have a custom patina or painted finish
• All top plates have been cleared coated for protection and durability
• This style foot switch has been around since the late 40's