Thin, flexible, and long-lasting: Cheyenne cables are made with high-grade, sturdy materials for exceptional reliability and durability. Use these power cables to connect your Cheyenne machine to our Power Units. You can also use our adapters to attach third-party power units or to attach the original Power Units with foot switches from other manufacturers.

The Cheyenne Hawk 3.5mm angled connection wire is used to connect your Cheyenne Pen to a Cheyenne power supply.

For the Cheyenne Spirit or Thunder, it is recommended to use the Cheyenne Hawk Connectiing Wire.

Features:

• Original Cheyenne Corporate Design
• User-friendly shape
• Reliable and stable
• Quality that’s "Manufactured in Berlin"
• Length: 6.5 ft. long

Looking for something a little different...? You might be attracted to our new magnetic power cords!

Simply plug the magnetic adapter into any machine equipped with an RCA connection and you're ready for power. The super strong magnet creates a strong connection ensuring you won't lose power during those long sessions. 

• Length: 7ft (84 inches)
• RCA magnetic adapter (included)
• High quality magnet makes for super strong connection 
• Injection molded connectors for durability and strain relief
• Compatible with all power units equipped with a 1/4" input jack
• Lightweight power cord, helps reduce hand fatigue
• High quality plated connectors for improved connectivity

Thin, flexible, and long-lasting: Cheyenne cables are made with high-grade, sturdy materials for exceptional reliability and durability. Use these power cables to connect your Cheyenne machine to our Power Units. You can also use our adapters to attach third-party power units or to attach the original Power Units with foot switches from other manufacturers.

The Cheyenne Hawk 3.5mm connection wire is used to connect your drive to the Cheyenne power supply.

For the Cheyenne Pen, it is recommended to use the Angled Cheyenne Hawk Pen wire.

Features:

• Original Cheyenne Corporate Design
• User-friendly shape
• Reliable and stable
• Quality that’s "Manufactured in Berlin"

The Cheyenne HAWK thunder is designed to work at its optimal level with the latest version of Cheyenne Power Supplies (either the PU2 or the new PU1). If you are running the thunder on either the new PU1 or the latest version of the PU2 then you do not need this cable. An integrated board in the latest versions of the PUI and PUII makes it possible to start the machine with 4-6V.

The thunder has a very powerful motor and as such on some power supplies without this cable a voltage of 10-11 will be needed to start the motor and run the machine, the voltage can then be turned down as required to 3-5 volts without any problems.

This cable eliminates the need to start the thunder on approx.. 10-11 volts and then turn it down, it simply allows the user to start the HAWK thunder at their desired voltage.

Features:

• Original Cheyenne Corporate Design
• Length: 2m (78.7 inches)
• User-friendly shape
• Reliable and stable
• Quality that’s "Manufactured in Berlin"

**PLEASE NOTE: Your 12 month warranty is valid direct with Cheyenne. In the highly unlikely event that you experience a problem with your product, we will give you instructions of how to contact Cheyenne directly to resolve your issue.

The High-Jack by Joshua Bowers.

Designed for the professional tattooer, this magnetic power bracket helps keep your power cord suspended above the floor to prevent damage. The High-Jack magnetically attaches to your tattoo workstation for a stable setup, you also have the option to screw the High-Jack into your workstation.

The set-up is simple, plug the power cord from the High-Jack into your power supply, then plug your clip cord and or RCA power cord into the female jack located on the top end of the High-Jack. Having your power cords suspended above your work area reduces the pulling effect on the back of your machine, prevents you from rolling over the power cord with your chair, and reduces any tugs or snags during the tattoo session. Preventing power cord damages = saving money!

Some assembly is required, The High-Jack comes folded in half and can be re-folded after assembly for the traveling artist. The kit includes the following: one internal clip cord, two magnetic mounts along with two metal discs and two screws for manually attaching the High-Jack to your work station. An instructional insert is also included with your purchase.

Specifications:

• 5’ magnetic high jack 
• Magnetically attaches to compatible surfaces
• Adjustable height; can also rotate for a configurable setup
• Can be folded in half for traveling
• Can be manually screwed to to most workstations
• Plugs into the machine outlet of your power supply
  
• Suspends power cords during tattoo sessions
• Prevents tugging, extra weight, or snagging your cord while tattooing
• Created by tattooer Joshua Bowers
• Includes: 1 internal power cord, 2 magnetic mounts, 2 metal discs, 2 screws, and instructions insert with purchase

Thin, flexible, and long-lasting: Cheyenne cables are made with high-grade, sturdy materials for exceptional reliability and durability. Use these power cables to connect your Cheyenne machine to our Power Units. You can also use our adapters to attach third-party power units or to attach the original Power Units with foot switches from other manufacturers.

This Cheyenne headphone standard jack enables you to use your Cheyenne drive with most standard jack power supplies. When using the Cheyenne Thunder with normal power supplies, a startup cable may also be required.

Please note that this is compatible for the Cheyenne Thunder and Cheyenne Spirit only. For the Cheyenne Pen, it is recommended to use the Cheyenne Pen headphone standard jack.

Features:

• Original Cheyenne Corporate Design
• User-friendly shape
• Reliable and stable
• Quality that’s "Manufactured in Berlin"