Inkjecta – 3.5mm Cam (1 pc)

$22.00

Stroke Length and Compatibility
This 3.5mm cam is for tattooists who prefer a medium stroke length, which can be used for lining, shading, or packing in vibrant color. Tattooists can use this cam for any of our Flite Nano cam-driven machines.

Composition
InkJecta’s standard cams are constructed from chrome for durability.

Other Features
Each of the standard cams comes equipped with two grub screws. Tattooists can identify the stroke length on any of the cams by the symbol engraved on the side of each unit.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Black Flite Nano Cap (1 pc)

$18.00

Flite Nano Elite-Style Caps
You’ve seen them atop the Flite Nano Elite machines; InkJecta’s semi-transparent machine caps operate as cam covers and also protect the torsion bar system during procedures. The caps come in a variety of colors so tattooists can mix-and-match to individualize their Elite machine.

Composition and Compatibility
Each of the Flite Nano Elite-style caps is constructed from plastic. As indicated by their name, they are compatible with all of InkJecta’s Flite Nano Elite machines.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – 3.25mm Cam (1 pc)

$22.00

Stroke Length and Compatibility
InkJecta’s standard cam has a 3.25mm stroke length, which is reliable for a variety of tattooing procedures. Tattooists can use this standard cam as a replacement or back-up for any of our cam-driven machines.

Composition
InkJecta’s standard cams are constructed from chrome for durability.

Other Features
Each of InkJecta’s standard cams comes equipped with two grub screws. Tattooists can identify the stroke length on any of the cams by the symbol engraved on the side of each unit.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – 2.5mm Cam (1 pc)

$22.00

Stroke Length and Compatibility
InkJecta’s 2.5mm cam is for tattooists who prefer a short stroke length. It can be used for a number of procedures, but is especially useful for black & gray shading. Tattooists can use these cams for any of the Flite Nano cam-driven machines.

Composition
InkJecta’s standard cams are constructed from chrome for durability.

Other Features
Each of InkJecta’s standard cams comes equipped with two grub screws. Tattooists can identify the stroke length on any cam by the symbol engraved on the side of each unit.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Semi-Rigid Needle Bar 86mm (1 - Bar)

$15.00

About InkJecta Needle Bars
InkJecta needle bars are made to be used with their Flite Nano and Flite V2 Combo machines. Artists can use this semi-rigid needle bar in lieu of a spring mounted one to change the hardness with which the needle penetrates their client’s skin.

Length and Composition
This needle bar is made of medical-grade ertalyte and measures 86mm (~3.40”) long.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Semi-Rigid Needle Bar 86mm (1 - Bar)

Inkjecta – Red Flite Nano Cap (1 pc)

$18.00

Flite Nano Elite-Style Caps
You’ve seen them atop the Flite Nano Elite machines; InkJecta’s semi-transparent machine caps operate as cam covers and also protect the torsion bar system during procedures. The caps come in a variety of colors so tattooists can mix-and-match to individualize their Elite machine.

Composition and Compatibility
Each of the Flite Nano Elite-style caps is constructed from plastic. As indicated by their name, they are compatible with all of InkJecta’s Flite Nano Elite machines.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Hard Torsion Bar 86mm (1 - Bar)

$19.00

Patented Torsion Bar System
InkJecta patented torsion bars are unique and special. These bars were conceived by InkJecta’s very own Byron Dreschler, and allow tattooists to adjust the give of their favoredInkJecta machine with ease.

Compatibility
Tattooists can use InkJecta’s torsion bar system with our Flite Nano and V2.1 Combo models.

Length and Composition
These torsion bars measure approximately 86mm (~3.40”) long. They are constructed from high quality, medical grade ertalyte, and come in soft, medium, or hard varieties.

Other Features
InkJecta’s torsion bars are known for their flexibility and are thus often referred to as “flex” bars. Each comes with a series of ridges that allow for easy installment and removal while setting up your favored InkJecta machine.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Hard Torsion Bar 86mm (1 - Bar)

Sunskin Back Spring Soft

$7.00 $4.90 Save $2.10

Thanks to their many years of experience, we have designed and developed SUNSKIN springs.
Made of high quality carbon steel and wear resistant, are more elastic and maintain their calibration longer, resulting in long-lasting efficiency over time of the tattoo machines.

NO WARRANTY

Sunskin Silver Contact Screw

$18.00 $12.60 Save $5.40

Contact screw (M4 thread) made of 825 silver.

NO WARRANTY

Original Made in Italy.

Inkjecta – Soft Torsion Bar 86mm (1 - Bar)

$19.00

Patented Torsion Bar System
InkJecta patented torsion bars are unique and special. These bars were conceived by InkJecta’s very own Byron Dreschler, and allow tattooists to adjust the give of their favoredInkJecta machine with ease.

Compatibility
Tattooists can use InkJecta’s torsion bar system with our Flite Nano and V2.1 Combo models.

Length and Composition
These torsion bars measure approximately 86mm (~3.40”) long. They are constructed from high quality, medical grade ertalyte, and come in soft, medium, or hard varieties.

Other Features
InkJecta’s torsion bars are known for their flexibility and are thus often referred to as “flex” bars. Each comes with a series of ridges that allow for easy installment and removal while setting up your favored InkJecta machine.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – Soft Torsion Bar 86mm (1 - Bar)

Sunskin Armature Bar - Traditional Shader

$18.00 $12.60 Save $5.40

All Sunskin components are manufactured in Italy with the highest quality materials.
They use the best metals for their electrical conductivity characteristics, which is essential for low voltage devices like the tattoo machines.

The pack includes bar, screw and washer to assemble the springs.

NO WARRANTY

Sunskin Armature Bar - Traditional Shader

Sunskin Standard Black Coils

$80.00 $56.00 Save $24.00

These coil sets are made manufactured at Sunskin's facility in Italy. The copper wire used is of the OFC type on spools made from a block of Bakelite (the best material for this type of application). They are made this way they to ensure greater efficiency over time because they require a low voltage for use, therefore they will not heat up.
Lower voltage + Less heat = Great efficiency

Available in 10, 12 & 14 Wrap Sizes

Inkjecta – White Flite Nano Cap (1 pc)

$18.00

Flite Nano Elite-Style Caps
You’ve seen them atop the Flite Nano Elite machines; InkJecta’s semi-transparent machine caps operate as cam covers and also protect the torsion bar system during procedures. The caps come in a variety of colors so tattooists can mix-and-match to individualize their Elite machine.

Composition and Compatibility
Each of the Flite Nano Elite-style caps is constructed from plastic. As indicated by their name, they are compatible with all of InkJecta’s Flite Nano Elite machines.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta – 3.0mm Cam (1 pc)

$22.00

Stroke Length and Compatibility
InkJecta’s 3.0mm cam is for tattooists who prefer a medium stroke length. It can be used for lining or shading. Tattooists can use these cams for any of the Flite Nano cam-driven machines.

Composition
InkJecta’s standard cams are constructed from chrome for durability.

Other Features
Each of the standard cams comes equipped with two grub screws. Tattooists can identify the stroke length on any of cam by the symbol engraved on the side of each unit.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta - Medium Torsion Bar 86mm (1 - Bar)

$19.00

Patented Torsion Bar System
InkJecta patented torsion bars are unique and special. These bars were conceived by InkJecta’s very own Byron Dreschler, and allow tattooists to adjust the give of their favored InkJecta machine with ease.

Compatibility
Tattooists can use InkJecta’s torsion bar system with our Flite Nano and V2.1 Combo models.

Length and Composition
These torsion bars measure approximately 86mm (~3.40”) long. They are constructed from high quality, medical grade ertalyte, and come in soft, medium, or hard varieties.

Other Features
InkJecta’s torsion bars are known for their flexibility and are thus often referred to as “flex” bars. Each comes with a series of ridges that allow for easy installment and removal while setting up your favored InkJecta machine.

Manufactured in Australia
InkJecta is proud to handcraft all machines and technology exclusively in Australia. No outsourcing is involved in the manufacturing process.

Inkjecta - Medium Torsion Bar 86mm (1 - Bar)

Sunskin Custom Coils - Hannya

$96.00 $67.20 Save $28.80

These coil sets are made manufactured at Sunskin's facility in Italy. The copper wire used is of the OFC type on spools made from a block of Bakelite (the best material for this type of application). They are made this way they to ensure greater efficiency over time because they require a low voltage for use, therefore they will not heat up.
Lower voltage + Less heat = Great efficiency

Available in both 10 & 14 Wrap

NO WARRANTY

Sunskin Custom Coils - Skulls

$96.00 $67.20 Save $28.80

These coil sets are made manufactured at Sunskin's facility in Italy. The copper wire used is of the OFC type on spools made from a block of Bakelite (the best material for this type of application). They are made this way they to ensure greater efficiency over time because they require a low voltage for use, therefore they will not heat up.
Lower voltage + Less heat = Great efficiency

NO WARRANTY

Sunskin Back Copper Binding Post for Evolution

$18.00 $12.60 Save $5.40

Copper rear binding post, with clipcord lock. Complete with mounting screw, screw insulators and washers.

NO WARRANTY

Sunskin Back Copper Binding Post for Evolution

Sunskin Custom Coils - Ghost Skull

$80.00 $56.00 Save $24.00

These coil sets are made manufactured at Sunskin's facility in Italy. The copper wire used is of the OFC type on spools made from a block of Bakelite (the best material for this type of application). They are made this way they to ensure greater efficiency over time because they require a low voltage for use, therefore they will not heat up.
Lower voltage + Less heat = Great efficiency

Available in both 10 & 12 Wrap

NO WARRANTY

Sunskin Custom Coils - Victorian Time - 12 Wrap

$90.00 $63.00 Save $27.00

Each tattoo machine can be assembled and set up for lining, shading or solid color. The mechanical part makes the difference.
The liner has 10 wrap coils while the shader and color machine has 12 wrap coils.
Several combinations of springs and armature bars together with coils are crucial to obtain the different tunings.
The version 14W XXX has powered 14 wraps coils that combined with a specific set up allow the use of big magnum needles

LIFETIME WARRANTY

- A sample of artwork done with Sunskin Machines -

Sunskin Custom Coils - Victorian Time - 12 Wrap

Sunskin Armature Bar Shader

$12.00 $8.40 Save $3.60

Thanks to their many years of experience, we have designed and developed SUNSKIN springs.
Made of high quality carbon steel and wear resistant, are more elastic and maintain their calibration longer, resulting in long-lasting efficiency over time of the tattoo machines.

NO WARRANTY

Sunskin Back Copper Binding Post for Small V

$14.99 $10.49 Save $4.50

Copper rear binding post, with clipcord lock. Complete with mounting screw, screw insulators and washers.

NO WARRANTY
Original Made in Italy

Tattoo Machine Parts

Inkjecta – 3.5mm Cam (1 pc)

Inkjecta – Black Flite Nano Cap (1 pc)

Inkjecta – 3.25mm Cam (1 pc)

Inkjecta – 2.5mm Cam (1 pc)

Inkjecta – Semi-Rigid Needle Bar 86mm (1 - Bar)

Inkjecta – Red Flite Nano Cap (1 pc)

Inkjecta – Hard Torsion Bar 86mm (1 - Bar)

Sunskin Back Spring Soft

Sunskin Silver Contact Screw

Inkjecta – Soft Torsion Bar 86mm (1 - Bar)

Sunskin Armature Bar - Traditional Shader

Sunskin Standard Black Coils

Inkjecta – White Flite Nano Cap (1 pc)

Inkjecta – 3.0mm Cam (1 pc)

Inkjecta - Medium Torsion Bar 86mm (1 - Bar)

Sunskin Custom Coils - Hannya

Sunskin Custom Coils - Skulls

Sunskin Back Copper Binding Post for Evolution

Sunskin Custom Coils - Ghost Skull

Sunskin Custom Coils - Victorian Time - 12 Wrap

Sunskin Armature Bar Shader

Sunskin Back Copper Binding Post for Small V

Permanent Makeup Aftercare

Care Caps

Sunskin Tattoo Machines